Installing the ADF What the ADF Can Do Step 1: Unpack the ADF Step 2: Connect the ADF...
W h a t t h e A D F C a n D o The Automatic Document Feeder (ADF) is a powerful addition to your HP ScanJet color scanner. With the ADF, you can automatically scan up to 25 pages at a time (more or less depending on the paper weight).
1 Check for damage while unpacking the ADF. If you notice any damage, notify the dealer or mail order company where you bought the scanner. 2 Save the box and packing materials in case you need to transport the ADF.
1 Turn off the scanner by unplugging the power cord from the electrical outlet. 2 Open the cover. 3 Grasp both sides of the hinged end of the scanner cover and pull straight up until the cover comes off the scanner. You may need to move the cover from side to side to pull it off.
4 Store the cover on a flat, smooth surface in a safe place. You will not need the scanner cover as long as the ADF is installed. 5 Hold the ADF with the mounting posts perpendicular to the scanner. 6 Align the mounting posts with the slots at the rear of the scanner body.
8 Hold the ADF connector cable so that the arrow on the plug is on top. This helps you align the pins in the plug with their holes in the socket on the scanner. 9 Attach the ADF connector cable by pushing it firmly all the way into the round accessory connector socket labelled ADF on the back of the scanner.
Using the ADF Tips for Better Paper Handling Scanning Pages from the ADF Scanning a Single Page...
• Do not use the ADF to scan sheets of uncommon paper or other media, such as: Transparencies • Gummed-back paper • • Magazine pages • Lightweight (“onionskin”) carbons ADF on an HP ScanJet Tips for Better Paper Handling...
8.5 inches 21.6 cm For paper smaller than the minimum size, use the • scanner glass instead of the ADF. Paper smaller than the minimum may cause a paper jam. For paper lighter than 16-lb. bond (60 g/m • than 28-lb. bond (105 g/m instead of the ADF.
The stack is returned in the output tray with the pages face down in reading order. Loading Paper into the ADF 1 Make sure the scanner is plugged into an electrical outlet. 2 Make sure the scanner’s glass is free of paper.
Scanning Pages from the ADF 4 Put the top end of the paper stack face up on the input tray with the first page to be scanned at the top of the stack. 5 Push the paper stack up against the side of the ADF input tray nearest the lever.
6 Move the paper load lever to the number 3 position: Paper load lever at number 3 The ADF is now loaded and ready for scanning. Scanning Pages from the ADF...
Scanning Pages from the ADF Scan the Document in the ADF The ADF works with many software packages that are compatible with HP ScanJet color scanners. To scan a document, see the user’s manual of the software package you are using.
1 Remove any paper from the input tray. 2 Lift the ADF (by lifting from below the output tray) to expose the scanner glass. 3 Place the document face down on the scanner in the upper-right corner. 4 Lower the ADF.
Maintaining the ADF Cleaning the ADF Replacing the ADF Window Removing the ADF Ordering Parts and Supplies...
• Separation pad • To clean the ADF: 1 Turn off the scanner by unplugging the power cord from the electrical outlet. 2 Wipe the scanner glass (particularly the 2 inches below the ADF user-replaceable window) and the ADF window with a soft, clean, lint-free cloth. You...
separation pad Cleaning the ADF 4 Lift the hatch. 5 Wipe the rollers and separation pad with a soft, clean, lint-free cloth. You may also use isopropyl alcohol, if necessary. Separation pad under the hatch...
Hewlett-Packard (see “Ordering Parts and Supplies” on page 3-7). To remove the ADF window: 1 Remove the ADF from the scanner (see “Removing the ADF” on page 3-6). 2 Lift the input tray of the ADF to expose the ADF window.
Replacing the ADF Window To install the ADF window: 1 Position the four Z-shaped hooks of the ADF window into the four holes on the bottom of the ADF. 2 Rotate the ADF window back until it contacts the bottom of the ADF. 3 Check that the long, pointed tab is on the inside of the ADF.
Insert the mounting posts into the corresponding slots at the rear of the scanner body. b Lower the scanner cover until the mounting posts are seated firmly in the scanner. c Make sure both posts are in the same position.
Order parts and supplies for your hardware, including cables, additional manuals, and other accessories, from you local HP dealer. If your HP dealer cannot supply the parts, call the HP Support Materials group at: (800) 227-8164 U.S.A. (800) 387-3154 Canada...
C le a r in g P a p e r J a m s How you clear a paper jam depends on where the paper jams in the ADF: If the paper jams “early” in its path through the ADF •...
3 Grasp the paper and pull forward to release. Lifting the input tray to clear the jam Note DO NOT attempt to adjust the ADF parts that become visible when you lift the access hatch and input tray. These parts are serviceable only by an HP authorized dealer.
Supplementary Information Warranty Terms Specifications Regulatory Information...
Replacement products may be either new or like-new. HP warrants to you that HP software will not fail to execute its programming instructions after the date of purchase, for the period specified above, due to defects in material and workmanship when properly installed and used.
Warranty does not apply to defects resulting from (a) improper or inadequate maintenance or calibration, (b) software, interfacing, parts or supplies not supplied by HP, (c) unauthorized modification or misuse, (d) operation outside of the published environmental specifications for the product, or (e) improper site preparation or maintenance.
TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES. EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE FOR LOSS OF DATA OR FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL...
A D F Sp e c i f ic a t io n s Feature Specifications Size 11.94 by 19.5 by 3.63 inches (above scanner) (303 by 495 by 92 mm Weight 4.3 lbs/1.95 kg Paper tray capacity 25 sheets of 20 lb bond (75 g/m Maximum paper size 8.5 by 14 inches (216 by 356 mm)
Greeley, Colorado 80634 Contact Person: GHC Regulatory Manager 970-350-5600 Telephone: Product Name: HP ScanJet ADF C5195 (may contain suffix) Model Number(s): Product Options: None The manufacturer listed above declares that this product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC rules.
Manufacturer’s Name: Hewlett-Packard Company Manufacturer’s Address: Greeley Hardcopy Division 700 71st Avenue Greeley, Colorado 80634 Declares that the product: Product Name: HP ScanJet ADF Model Number(s): C5195 (may contain suffix) None Product Options: Conforms to the following Product Specifications: Safety: IEC950:1991+A1:1992+A2:1993+A3:1995+A4:1996...
The cover over the top of the ADF input tray that is opened to remove jammed paper. accessory connector socket The circular socket on the back of the scanner where the connector cable is inserted. ADF (automatic document feeder) A scanner accessory that feeds a paper stack to the scanner.
The stack of documents that are placed in the input tray and are fed by the ADF. scanner cover The cover of the scanner that is removed before the ADF is installed. scanner glass The glass surface on top of the scanner where a document is scanned.
Paper jams, clearing Paper load lever Paper stack inserting securing small size Parts, ordering Scanner cover replacing storing Scanner glass, checking Scanning from flatbed single pages using ADF with backing sheet Software document management image processing Unpacking the ADF 1-3, 2-4...