HP CC487-91209 Fax Manual page 75

4. Unscrew the thumb screws and pull the formatter from the product.
CAUTION:
electrostatic discharge (ESD). When handling the formatter board or the fax accessory card, use
static protection such as the following: 1) A grounding wrist strap that is connected to the metal
frame of the product. 2) Hold the metal frame of the formatter in your hand.
5. If necessary, remove the label that covers the fax port on the formatter.
6. Remove the fax accessory from its packaging.
CAUTION:
electrostatic discharge (ESD). When handling the formatter board or the fax accessory card, use
static protection such as the following: 1) a grounding wrist strap that is connected to the metal
frame of the product. 2) Hold the metal frame of the formatter in your hand.
ENWW
The formatter board and the fax accessory card contain parts that are sensitive to
The formatter board and the fax accessory card contain parts that are sensitive to
Install the fax accessory 63