Fax Setup Menu; Set Or Verify The Date And Time; Set, Verify, Or Change The Country/Region - HP CC487-91209 Fax Manual

Country/region
●
Fax phone number
●
Company name
●
This information is used in the fax header, which is printed on all outgoing faxes.
The wizard starts when the product is first turned on. You can choose to use the wizard or exit the
wizard to configure the settings at a later date.
You can also access the wizard through the
Initial Setup
NOTE: The settings configured using the wizard on the control panel override any settings made in
the embedded Web server.

Fax setup menu

Set the required fax settings by accessing the
Initial Setup
NOTE: If the
enabled. When LAN fax is enabled, the analog fax accessory is disabled and the fax menu does not
display. Only one fax feature, either LAN fax or analog fax, can be enabled at a time. The fax icon
displays for either fax feature. If you wish to use analog fax when LAN fax is enabled, use the
HP MFP Digital Sending Software Configuration Utility to disable LAN fax.

Set or verify the date and time

The date and time setting for the fax accessory is the same value as the product date and time
setting. If this is the first time you are turning on the product, you are prompted for this information.
To verify or change the date and time settings, complete the following steps.
1. On the control panel, scroll to and touch the
menu.
2. Scroll to and touch
3. Touch
4. Select the date format and then enter the date.
5. Select the time format and then enter the time.
6. Touch

Set, verify, or change the country/region

The country/region setting identifies the country/region where the product or fax accessory is located.
This setting also sets the date and time format and minimum and maximum rings-to-answer range for
the country/region. Because this setting is a legal requirement in some countries/regions, it must be
set for the fax accessory to operate. If this is the first time you are turning on the product, you are
prompted for this information.
12 Chapter 2 HP Color LaserJet CM3530 MFP Series
menu, and then touch the
menu, and then touch the
Fax Setup menu settings does not appear in the menu listing, LAN fax might be
Initial Setup
Required Settings.
Save to accept the settings.
Administration menu on the control panel. Touch the
Fax Setup menu.
Administration
Fax Setup menu.
Administration
to display the setup settings menu and then touch
menu on the control panel. Touch the
icon to open the Administration
Fax Setup.
ENWW