Fax settings
The following sections detail the various settings for sending and receiving faxes.
Send fax settings
●
Receive fax settings
●
Fax archive and forwarding
●
Send fax settings
Use the Fax Send Setup menu to configure the following features:
Fax dialing settings
●
General fax settings
●
Default job options
●
Fax dialing settings
Set the modem volume
1.
On the control panel, scroll to and touch the
menu.
2.
Scroll to and touch
3.
Touch
4.
Touch
5.
Touch
6.
Touch Off;
7.
Touch
Set the dialing mode
The dialing mode setting sets the type of dialing that is used: either tone (touch-tone phones) or pulse
(rotary-dial phones).
To set the dialing mode, perform the following steps.
1.
On the control panel, scroll to and touch the
menu.
2.
Scroll to touch
3.
Touch
4.
Touch
5.
Touch
6.
Touch
7.
Touch Save.
16
Chapter 2 HP Color LaserJet CM3530 MFP Series
Initial Setup
Fax Setup
to display the Fax Setup menu.
Fax Send Settings
to display the Fax Send Settings menu.
Fax Dial Volume
to display the Fax Dial Volume menu.
Low
(default), or
High
Save
to save the volume setting.
Initial Setup
to open the initial setup menu.
Fax Setup
to open the fax setup menu.
Fax Send Settings
and use the down arrow key to scroll to
Dialing Mode
to see the dialing mode settings.
Tone
(default) to set the fax for tone dialing, or touch
Administration
to display the Initial Setup menu.
to set the volume.
Administration
icon to open the Administration
icon to open the Administration
Dialing
Mode.
Pulse
to set the fax for pulse dialing.
ENWW