Change The Light/Dark Setting; Activate Fax Number Speed Dial Matching; Set The Error Correction Mode; Set Billing Codes - HP CC487-91209 Fax Manual

Change the light/dark setting

The light/dark setting adjusts how light or dark the transmitted image appears on the recipient fax
machine. Adjusting the light/dark setting can increase resolution which also increases transmission
time.
1. On the control panel, touch the
2. Scroll to and touch
3. Scroll to and touch
4. Under the
arrow to make the image darker.
5. Touch OK

Activate Fax Number Speed Dial Matching

If this feature is enabled, the product tries to match any fax number entered with existing entries in
the speed dial list. If a match is found, you can confirm the match and have the product complete the
faxing action automatically. The default setting for this feature is Disabled.
1. On the control panel, touch the
2. Scroll to and touch
3. Scroll to and touch
4. Touch Enabled.
5. Touch Save.

Set the error correction mode

Normally, the fax accessory monitors the signals on the telephone line while it is sending or receiving
a fax. If the fax accessory detects an error during the transmission and the error correction setting is
on, the fax accessory can request that the error portion of the fax be sent again.
If error connection mode is not enabled, it cannot work in fast mode. The fax will go 14,400 bps or
slower.
1. On the control panel, scroll to and touch the
menu.
2. Touch Initial Setup
3. Touch Fax Send Settings
4. Touch
5. Touch
mode.

Set billing codes

The billing-code setting, when enabled, prompts the user to enter a number when sending a fax. This
number is placed in the billing-code report. To view the billing-code report, either print the report or
query it by using an application.
ENWW
More Options.
Image Adjustment.
Darkness heading, touch the left arrow to make the image lighter and touch the right
to accept the setting.
Initial Setup
Fax Number Speed Dial
to open the setup settings menu and then touch
to see the settings.
Error Correction Mode
Enabled (default) to enable error correction mode, or touch
Fax icon to display the Fax screen.
Administration icon to open the Administration menu.
and then Send Setup.
Matching.
Administration
to see the settings.
icon to open the Administration
Fax Setup.
Disabled to disable correction
Fax settings 21