Set Ring Frequency; Advanced Image Processing Settings; Adjust Sharpness - HP CC487-91209 Fax Manual

Set ring frequency

NOTE: The default ring frequency covers a broad frequency range, and should rarely require
adjustment.
1. From the Home screen, scroll to and touch the
2. Open the following menus:
Fax Settings
●
Fax Receive Settings
●
Fax Receive Setup
●
3. Touch the box beneath the
4. Enter a value for the ring frequency on the keypad, and then touch the
setting for ring frequency is 68 hz.
5. Touch the

Advanced image processing settings

Use the advanced image settings to enhance scanned images in several ways. The following settings
can be adjusted:

Adjust sharpness

●
Erase edges
●
Automatic color detection
●
Automatic page cropping
●
Automatic image orientation
●
Automatic tone adjustment
●
Adjust sharpness
Adjust the Sharpness setting to clarify or soften the image. For example, increasing the sharpness
can make text appear crisper, but decreasing it can make photos appear smoother.
1. From the Home screen, touch the Fax button.
2. Complete the fields on the first screen to specify the fax recipient information.
3. Touch the More Options button at the bottom of the screen.
4. Touch the Image Adjustment button.
NOTE:
Options button again to scroll to the next page.
5. Adjust the Sharpness slider to the left to decrease the sharpness, or adjust it to the right to
increase the sharpness.
ENWW
Ring Frequency
Save button.
If the Image Adjustment button is not on the first page of options, touch the More
Administration button.
heading to open the keypad.
OK button. The default
Fax settings 93