HP CC487-91209 Fax Manual page 78

4. Remove the fax accessory from its packaging.
CAUTION:
electrostatic discharge (ESD). When handling the formatter board or the fax accessory card, use
static protection such as the following: 1) A grounding wrist strap that is connected to the metal
frame of the product. 2) Hold the metal frame of the formatter in your hand.
5. Locate the fax accessory connector openings on the formatter. Align the connectors on the fax
accessory with the openings on the formatter, and then push down firmly.
NOTE:
cage first.
6. Connect the fax accessory cable to the formatter.
66 Chapter 3 HP Color LaserJet CM 4540 MFP Series, HP Color LaserJet Enterprise M4555 MFP
Series, HP LaserJet Enterprise 500 MFP Series, HP LaserJet Enterprise 500 Color MFP Series,
and HP LaserJet Enterprise M725 MFP Series
The formatter board and the fax accessory card contain parts that are sensitive to
The fax accessory card must be aligned behind the metal tab on the right side of the
ENWW