Send A Fax; Send A Fax - Enter Numbers Manually - HP CC487-91209 Fax Manual

When the Recipient Number Entry Box
1
button for adding special character brackets ([ ]) to hide a PIN number, and a
comma for a two second pause.
Figure 2-2 Recipient number entry box

Send a fax

To send a fax, you can use one of three basic methods to enter numbers:
Enter numbers manually.
●
Enter numbers using speed dial.
●
Enter numbers using the phone book (available only if HP MFP Digital Sending Software
●
Configuration Utility is installed and the phone book has been populated).
NOTE: For online information about sending a fax, touch
and then touch
When entering a phone number from the numeric keypad, include any pauses or other numbers,
such as area codes, access codes for numbers outside a PBX system (usually a 9 or 0), or a long-
distance prefix. A two second pause may be included by typing a comma (,). To enter a comma,
press the Pause
prefix, you will not need to enter it.
NOTE: When a fax is sent, it is first scanned and stored into memory. After the entire document is
stored, it is sent and then deleted from memory. If redials are set to zero, faxes that fail to send,
because the number was busy or did not answer, are deleted from memory. If Redial-On-Busy or
Redial-On-No-Answer are set, the fax will not be deleted until all retries fail or the fax is sent
successfully.

Send a fax - enter numbers manually

1. Place the document in the automatic document feeder (ADF) or on the scanner glass.
2. From the main screen, touch the
password.
3. Touch More
These settings include:
ENWW
Send a fax under the list of help topics.
button. If the fax prefix setting has been set to automatically include the dialing
Options. Verify that the Describe Original settings match those of your original.
is pressed, a pop up is displayed which includes the
?
Fax icon. You may be prompted to type a user name and
Pause
on the screen to access the help menu,
PIN
button to insert a
Use fax 35