Status4 Menu; Sat Field; Freq Field; Symb Field - Motorola DSR-6403 Operator's Manual

3

Status4 Menu

This menu only applies to RF input. Press the  buttons until the STATUS4 menu appears. This
screen displays the satellite name and signal tuning characteristics.

Sat Field

This status-only field displays the satellite name from the downloaded network information.
Dashes (---) are displayed when no information is available.

Freq Field

This status-only field displays the downlink frequency of the L-band signal. This may be different
from the frequency that was initially set in the Manual Tune menu.

Symb Field

This status-only field displays the symbol rate (megasymbols per second) of the L-band signal.
Dashes (---) indicate that no information is available.

Code Field

This status-only field displays the code rate (Error Control Coding for Forward Error Correction)
of the L-band signal.

Format Field

This status-only field displays the format of the L-band signal. The field displays either Comb
(Combined) or Split. Dashes (---) are displayed when no information is available.

Status5 Menu

This menu only applies to RF input. Press the  buttons until the STATUS5 menu appears. This
screen displays the sync, Eb/No, and authorization state of the unit.
66
STATUS4
Sat Freq
E --- 1430.00 11.71 5/6
STATUS5
Sync Eb/No
E Tuning -2.0
Symb Code Format
Comb
Authorize State
Undefined Service