Fast Facts 8 (Inbox) - Motorola DSR-6403 Operator's Manual

7

Fast Facts 8 (Inbox)

The Fast Facts 8 screen displays the unit's current user-selected message from the list of all arrived mes-
sages within the Inbox
299 91102
267
A
1 812 2757094246
C D E
F
1/04/2011 17:38:05: A code download is
scheduled for 11/07/11 at 17:00. This
will be the last download until we can
look at future enhancements.
Field Name
Number of Inbox
A
Messages
Message Drop
B
Count
Message Number
C
Page ID
D
CRC
E
Received Time
F
Message Text
G
.
96
.
Fast Facts 8
(INBOX)
35
B
G
Displays the number of messages (0 to 300) that are currently in the Inbox. For
more details, see the above note.
Indicates the number of messages that were dropped due to a system overflow. A
system overflow occurs when the 300-message maximum is exceeded, as
described in the above note.
If 0 appears in this field, no Inbox messages have been dropped since the most-
recent factory reset. If 1 appears in this field, 301 messages have arrived since the
most-recent factory reset and the oldest message was automatically purged. If 2
appears in this field, 302 messages have arrived and the two oldest messages were
automatically purged. Etc.
Displays the message number that is currently being displayed from the Inbox. To
display a different message, use the
If it is necessary to move the message to the archive and exit the message, press
ENTER and ENTER again to confirm the move. To exit the message without mov-
ing it to the archive, press ENTER and any arrow button (
Message Page ID. This number is a running count of the mail messages that were
sent from the BNC (uplink provider).
Message's Cyclic Redundancy Check (CRC) value code.
Displays the date and time at which this message was received at the decoder.
The time is shown in GPS, as defined at the uplink. The time stamp is followed by
a colon (:).
Displays the text message.
Note: The unit will maintain up to
300 mail messages between the
Inbox mail messages (Fast Facts 8)
and the Archived messages (Fast
Facts 9). For example, when the
st
301 message arrives, the oldest
message is then automatically
purged. The unit, therefore, main-
tains the most recent 300 mail mes-
sages. Performing a factory reset
will delete all messages from the
decoder and reset the Message Drop
Count field ( ) to 0.
B
Definition
4
buttons to scroll through the messages.
4 ).