Sync Field
This status-only field displays the acquisition Sync state. The Sync state can be either Locked
or Tuning.
Eb/No Field
This status-only field displays a value from 0.0 to 35.0 that designates a measurement of the
signal-to-noise ratio.
Authorize State Field
This status-only field displays the authorization state of the currently-selected channel. This field
indicates how the Satellite Multiplex Receiver/Transcoder is authorized. If the Authorization State is
Not Authorized, the field will alternate, and display a reason why it is not authorized (e.g., Missing
Map). Table 3-1 describes each authorization state.
Table 3-1: Authorization States
Authorize State
Missing Map
Undefined Channel
Undefined Service
Unencrypted
Unknown
No Program Rekey
No Working Key
No Event Blackout
No Category Key
Old Category Seq
Subscrb With Tape
Subscrb w/o Tape
Bad Seed Chksum
Not Subscribed
Regional Blackout
Event Blackout
Circular Blackout
DSR-6400 Series
Incorrect Virtual Channel Table Number
Incorrect Virtual Channel Number
Incorrect Service Number
Service is not Encrypted
Unknown State
Program Rekey Message is Missing
Working Key Epoch Message is Missing
Event Blackout Message is Missing
Missing Category Key is Missing
Old Category Sequence in Program Rekey Message
Subscribed With Taping
Subscribed Without Taping
Bad Seed Checksum
Not Subscribed
Regional Blackout
Event Blackout
Circular Blackout
Description
67