10/100 Subnet Mask Menu; 10/100 Default Gateway Menu; Port Gige Mac Address Menu - Motorola DSR-6403 Operator's Manual

10/100 Subnet Mask Menu

Use the following procedure to set and view the Subnet Mask address for the left Ethernet port on
the back panel of the unit. Press the  buttons until the Subnet Mask menu appears. The subnet
mask is represented in the common dotted-decimal format. Contact the network administrator for
details about configuring the Ethernet port for operation on your local network.
Press the 4 button until the cursor is at the Subnet Mask label, and press ENTER to move into the
field. Use the arrow button ( 4 ) to enter the desired address and then press ENTER to confirm
the selection and exit the field.

10/100 Default Gateway Menu

Use the following procedure to set and view the Default Gateway address for the left (10/100)
Ethernet port on the back panel. Press the  buttons until the 10/100 Default Gateway menu
appears. The IP Gateway is an address that is represented in the common dotted-decimal format.
Contact the network administrator for details about configuring the Ethernet port for operation on
your local network.
Press the 4 button until the cursor is at the 10/100 Default Gateway label, and press ENTER to
move into the field. Use the arrow buttons ( 4 ) to enter the desired gateway address and
press ENTER to confirm the selection and exit the field.

Port GigE MAC Address Menu

To view the GigE MAC address for the right Ethernet port on the back panel, press the 
buttons until the Port GigE menu appears. The address is represented in a hexadecimal format and
it is not editable.
DSR-6400 Series
 PORT 10/100  Subnet Mask
E 255.255.255.000
 PORT 10/100  Default Gateway
E 192.168.000.001
PORT GigE
MAC Address
E hh:hh:hh:hh:hh:hh
Default: 255.255.255.000
Default: 192.168.000.001
Default: hh:hh:hh:hh:hh:hh
59