Viewing The Fast Fact Diagnostic Screens - Motorola DSR-6403 Operator's Manual

7

Viewing the Fast Fact Diagnostic Screens

The diagnostic screens (Figure 8-1) are available via the On-Screen Display (OSD) video out
using a video monitor connected to the OSD Video Out port on the back of the unit.
To view the OSD diagnostic screens, press the  buttons on the front of the unit until the
Diagnostic menu appears, and press ENTER to access the Diagnostic menu on the unit.
Press the 4 button to navigate to the Menus field and press ENTER to move into the field.
Use the  buttons to choose one of the Fast Fact Diagnostic screens.
Note: Pressing ENTER while viewing a particular OSD diagnostic screen allows for the
continued display of the OSD diagnostic information while allowing the user to navigate thru
other front-panel menus.
NOTE: To move
between these two
screens, use the
4 buttons.
86
 DIAG  Menus
E Off
 DIAG  Menus
E Diag E
FF1
Fast Facts 1 (General Information) [page 87]
FF2
Fast Facts 2 (RF Port Configuration) [page 89]
FF3
Fast Facts 3 (Video Information) [page 90]
FF4
Fast Facts 4 (Audio1 and 2 Information) [page 92]
FF5
Fast Facts 5 (10/100 Ethernet Port Information) [page 93]
FF5
Fast Facts 5 (GigE Port Information) [page 94]
FF7
Fast Facts 7 (Decoder Address) [page 95]
FF8
Fast Facts 8 (Inbox) [page 96]
FF9
Fast Facts 9 (Archive) [page 97]
Figure 8-1: Fast Fact Diagnostic Screens
 PR
1
 Clear Cntrs  PR
No 1