2
To operate the DSR-6400 Series decoder remotely
Open a browser session, type the decoder's unique IP address in the address bar, and
1.
press the ENTER key.
For example, if the decoder is configured with IP address 10.11.23.60, then go to the
browser, type:
When the login dialog box appears (as shown below), enter the User name and Password
2.
and select OK.
When the Home Page appears (as shown below), use the sidebar menu to access the
3.
decoder's various settings and control features.
.
22
http://10.11.23.60
6401
in the address bar, and press ENTER.
Note: The uplink programmer who authorizes
the unit has the option to set the User Name
and Password. If they authorize the unit
without using this option, leave both fields
blank and simply select OK to gain access to
web-based remote operation. (Blank) is the
default User Name and Password.