3
Channel Field
Quality Field
Status3 Menu
Status4 Menu
Sat Field
Freq Field
42
The Channel field displays the selected virtual channel number (from the Channel
menu). Dashes are displayed when no information is available.
The Quality field displays a number from 1 to 100 so that the quality level of the signal
can be judged. The signal quality is also displayed as a large bar graph in the Status3
menu. If the signal is 50 or less, it is marginal. If it is 35 or less, take action at your site
to increase the dish size or improve the LNB to prevent occasional loss of output.
This menu does not appear if the Input field (described on page 13) is set to ASI In.
Press the56buttons until the STATUS3 menu appears. This screen displays the
quality level of the signal as a large bar graph that expands to fill the entire LCD screen.
This menu does not appear if the Input field (described on page 13) is set to ASI In.
Press the56buttons until the STATUS4 menu appears. This screen displays the
satellite name and signal tuning characteristics.
This field displays the satellite name from the downloaded network information.
Dashes are displayed when no information is available.
This field displays the downlink frequency of the L-band signal. This may be
different from the frequency that was initially set in the Manual Tune menu.