Table of Contents
Advertisement
3
Channel Field
Quality Field
Status3 Menu
Status4 Menu
Sat Field
Freq Field
44
This status-only field displays the selected virtual channel number (from the
Channel menu). Dashes are displayed when no information is available.
This status-only field displays a number from 1 to 100 so that the quality level of
the signal can be judged. The signal quality is also displayed as a large bar graph in
the Status3 menu. If the signal is 50 or less, it is marginal. If it is 35 or less, take
action at your site to increase the dish size or improve the LNB to prevent
occasional loss of output.
This menu does not appear if the Input field (described on page 15) is set to ASI In.
Press the 56 buttons until the STATUS3 menu appears. This screen displays the
quality level of the signal as a large bar graph that expands to fill the entire LCD screen.
This menu does not appear if the Input field (described on page 15) is set to ASI In.
Press the 56 buttons until the STATUS4 menu appears. This screen displays the
satellite name and signal tuning characteristics.
This status-only field displays the satellite name from the downloaded network
information. Dashes are displayed when no information is available.
This status-only field displays the downlink frequency of the L-band signal. This
may be different from the frequency that was initially set in the Manual Tune menu.
STATUS3
Signal_Quality
E
||||||||||||||||||..............................
STATUS4
Sat
Freq
Symb
E
---
1430.0
29.00
Code Format
3/4
Comb
Advertisement
Table of Contents
