Gige Xcoded Dest Addr Menu; Xcoded Dest Addr Field; Port Field; Gige Passthru Dest Addr Menu - Motorola DSR-6403 Operator's Manual

3

GigE Xcoded Dest Addr Menu

Use this menu to set the GigE transcoded destination address and the associated port. This menu
is only operational if the TS Mode field is set to either Transcoded or Transcoded+Passthru. Press
the  buttons until the Port GigE Xcoder Dest Addr menu appears.

Xcoded Dest Addr Field

Press the 4 button until the cursor is at the Xcoded Dest Addr label, and press ENTER to move into
the field. Use the arrow button ( 4 ) to enter the desired address and press ENTER to confirm
the selection and exit the field.

Port Field

Press the 4 button until the cursor is at the Port label, and press ENTER to move into the field.
Use the arrow button ( 4 ) to enter the desired value and then press ENTER to confirm the
selection and exit the field.

GigE PassThru Dest Addr Menu

Use this menu to set the GigE pass through destination address and the associated port. This menu
is only operational if the TS Mode field is set to either Passthru or Transcoded+Passthru. Press the
 buttons until the Port GigE PassThru Dest Addr menu appears.

PassThru Dest Addr Field

Press the 4 button until the cursor is at the PassThru Dest Addr label, and press ENTER to move
into the field. Use the arrow button ( 4 ) to enter the desired address and then press ENTER
to confirm the selection and exit the field.
Port Field
Press the 4 button until the cursor is at the Port label, and press ENTER to move into the field.
Use the arrow button ( 4 ) to enter the desired value and then press ENTER to confirm the
selection and exit the field.
62
PORT GigE Xcoded Dest Addr
E 192.168.054.201
Default: 192.168.054.201
Default: 06100
PORT GigE PassThru Dest Addr
E 192.168.054.200
Default: 192.168.054.200
Default: 06000
Port
06100
Port
06000