L1/R1 And L2/R2 Fields; Video Test Signal Menu; Pattern Field - Motorola DSR-6403 Operator's Manual

L1/R1 and L2/R2 Fields

Use the appropriate field (either L1/R1 or L2/R2) to choose one of the following test tones:
• 1000
• 4040, 3960 (two tones)
At the completion of the test, press ENTER to disable the test, exit the field, and return the field to
the default setting (Off).

Video Test Signal Menu

Press the  buttons until the Video Test Signal menu appears. Use the full-field video test
signal to display different test patterns by selecting options within the Pattern field. This affects
both video ports (Video and OSD Video).
Caution: This selection replaces video.

Pattern Field

Press the 4 button until the cursor is at the Pattern label, and press ENTER to move into the field.
Press the  buttons to display the test patterns. Choose from the options listed below:
NTSC/PAL M Test Pattern Options
Color Bar
IRE 100 Ramp
NTSC 7 Comb
Red Field
NTSC 7 Comp
5 Step Stair
Unmod Y Ramp
Off (Default)
Test signals override any active service component, and the unit displays diagnostics over the
video test patterns if diagnostics are enabled. For details, see "Menus Field" on page 75. To
disable the selected video test signal, return to the Off setting or press ENTER to exit the field.
DSR-6400 Series
Default: Off
 VIDEO TEST SIGNAL  Pattern
E Off
Default: Off
77