Manual Tune Menu - Motorola DSR-4410 Operator's Manual

3

Manual Tune Menu

This menu allows the user to initially acquire a DigiCipher II system signal and download
virtual channel tables by selecting a transponder frequency for each of the two L-band
inputs, which are labeled Port 0 and Port 1.
When either Port 0 or Port 1 is selected the user must additionally specify an L-band
frequency and modulation format; refer to the Modulation menu description.
Because the North American C-band frequency plans are standardized, select a
transponder number for these satellites. Use the Xpndr option in the Mode field and the
Xpndr (transponder) fields for these.
If, however, selection of an International C-band, a functional transponder, or a Ku-band
satellite is preferred, use the L Freq option in the Mode field and directly enter the L-band
frequency. The DSR-4410 requires no distinction between Ku-band and C-band signals
after selecting the L-band carrier frequency.
Input Field
The Input field displays the input to which the receiver is currently tuned. It allows manual
selection of Port 0, Port 1, or the ASI input so that the unit can acquire the DigiCipher II
system signal and automatically download network data required for operation.
To select the input:
Press the4button until the cursor is at the Input label, and press the Enter button.
Press the56buttons to scroll to the input that is connected. Unless changed, a receiver
will display values for Port 0. Press Enter to confirm the selection and return to the top line
of the menu. If Port 0 or Port 1 is selected, then move to the Mode field, Xpndr field or
Lfreq field. These fields are not visible when ASI In is selected.
14