GigE Passthru Dest Addr Menu
Use the following procedure to set and view the passthrough SPTS destination
address. The passthrough single program transport stream is described in the
section entitled "GigE Mode Menu." Press the56buttons until the GigE Passthru
Dest Addr menu appears. The pass-through SPTS destination address is
represented in the common dotted-decimal format. Contact the network
administrator for details about configuring the pass-through SPTS destination
address on your local network.
Passthru Dest Addr Field
Press the4button until the cursor is at the Passthru Dest Addr label, and press the
ENTER button to move into the field. Use the arrow button (3456) to enter
the desired address and then press the ENTER button to confirm the selection.
Port Field
Press the4 button until the cursor is at the Port label, and press the ENTER button
to move into the field. Use the arrow button (3456) to enter the desired port
ID (Range: 00000 to 65535) and then press the ENTER button to confirm the
selection. The default is 06000.
GigE Xcoded Dest Addr Menu
Use the following procedure to set and view the transcoded SPTS destination
address. The transcoded single program transport stream is described in the section
entitled "GigE Mode Menu." Press the56buttons until the GigE Xcoded Dest
Addr menu appears. The transcoded SPTS destination address is represented in the
common dotted-decimal format. Contact the network administrator for details
about configuring the transcoded SPTS destination address on your local network.
DSR-6050
Operating the DSR-6050
39