Gige Menus; Gige Mac Address Menu; Gige Ip Address Field - Motorola DSR-4530 Operator's Manual

GigE Menus

GigE MAC Address Menu

Read-only

GigE IP Address Field

DSR-4530
Use the GigE menus is to configure the GigE port. To access the GigE menus, press
ENTER button to return to the main top-level menu (shown below).
E
Press the 34 buttons until the cursor is at the IP label, and press the ENTER
button. The DSR-4530 displays the first sub-menu within the IP menus. Follow the
procedures provided to access the various GigE menus within the IP menu
structure.
Use the following procedure to view the GigE MAC address for the upper Ethernet
port on the back panel of the DSR-4530. The GigE MAC address is represented in a
hexadecimal format and non-editable.
Press the 56 buttons until the Port GigE menu appears (shown below).
PORT GigE
E
Use the following procedure to set and view the GigE IP address (range:
000.000.000.000 to 255.255.255.255) for the upper Ethernet port on the back panel
of the DSR-4530. The address is represented in the common dotted-decimal
format. Contact the network administrator for details about configuring the GigE
port for operation on your local network.
Press the 56 buttons until the GigE IP Address menu appears (shown below).
PORT GigE
E
Press the 4 button until the cursor is at the Address label, and press the ENTER
button to move into the field. Use the 34 buttons to select the digit to change and
then, while the cursor is on that digit, press the 56 buttons to display the desired
value. Repeat this process for each applicable digit to be changed.
Press the ENTER button to confirm the selection and exit the field.
DSR-4530
Install Channel IP
MAC Address
hh-hh-hh-hh-hh-hh
IP Address
192.168.000.100
Operating the DSR-4530
Status Diag
45