N-Ring show switch
Command Name
Description
Syntax
Parameters
Examples
NOTES
N-Ring set keepalive
Command Name
Description
Syntax
Parameters
Examples
NOTES
N-Ring get keepalive
Command Name
Description
Syntax
Parameters
Examples
NOTES
(Revised 2011-07-21)
n-ring show switch
From the N-Ring Manager, shows info about a switch on the N-Ring.
n-ring show switch <MAC ADDRESS>
<MAC ADDRESS>
N-TRON/Admin#[12]n-ring/show> switch 00:07:af:ff:f6:40
Information for 00:07:af:ff:f6:40
Name
: N-TRON Switch
Location
: Mobile, AL 36609
Product Name
: N-TRON 7000 Series
Product Version : 4.1.1
IP Address
: 192.168.1.233
Subnet Mask
: 255.255.255.0
N-Ring Port 1
: 1
N-Ring Port 2
: 2
N-TRON/Admin#[13]n-ring/show>
n-ring set keepalive
Set timeout after which an N-Ring member will drop back to RSTP mode
on the N-Ring ports after loosing communication with the N-Ring manager.
n-ring set keepalive <timeout>
timeout
Timeout in seconds
N-TRON/Admin#[10]n-ring/set> n-ring set keepalive 40
Keep-Alive Timeout set to 40
Default is 31 seconds
n-ring get keepalive
Get timeout after which an N-Ring member will drop back to RSTP mode
on the N-Ring ports after loosing communication with the N-Ring manager.
n-ring set keepalive
None
N-TRON/Admin#[10]n-ring/get> n-ring get keepalive
Keep-Alive Timeout is 31
page 138 of 152