Display Information Of A Particular Vlan; Modify An Existing Vlan - N-Tron 7014TX User Manual & Installation Manual

Display Information of a particular VLAN

Command Name
Description
Syntax
Parameters
Examples
NOTES

Modify an existing VLAN

Command Name
Description
Syntax
Parameters
Examples
NOTES
(Revised 2011-07-21)
vlan get info
Displays the details of a particular VLAN.
vlan get info <vlan-id>
vlan-id
Vlan id of the existing vlan whose individual
configuration is required.
N-TRON/Admin#[1]> vlan get info 2
vlan ID : 2
vlan Name : "vlan 2"
port list : 1-4,11
tagged port mask: 10-15
management port : NO
vlan modify
Modifies an existing VLAN.
vlan modify <vlan id> <mgmt port>
<at least one of: [-untagged <port mask>] or [-tagged <port mask>]>
[-name <vlan name>] [-admit <tagged-only|all>] [-mirror <port-no>]
vlan-id
unique vlan id ( 2 ~ 4094).
mgmt port
Management Port, yes or no (1 or 0).
-untagged port mask
List of ports that are to be included under this VLAN.
Commas can be used to separate individual ports (2,5,9)
and the range can be specified using a hyphen (10-15).
The port numbers cannot exceed the maximum number
of port on the board.
-tagged port mask
Tagged port list values can be specified in the same way as that of
-untagged port mask.
vlan name
unique clan name, which can be used to identify.
admit
tagged-only or all. Type of packets can enter the port.
port-no
Optional parameter. Port number that data should be mirrored to.
N-TRON/Admin#[1]> vlan modify 2 1 –tagged 11-12 –name
"newvlan2"
N-TRON/Admin#[2]> vlan modify 3 1 –untagged 1-10 –name "vlan
3" –admit all
Changing anything on a VLAN will turn on RSTP on all VLANs as a
precautionary measure.
page 124 of 152