User Management Commands; Show System Users; Add A System User; Modify A User"S Access Permissions - N-Tron 7014TX User Manual & Installation Manual

User Management Commands

Show System Users

Command Name
Description
Syntax
Parameters
Example
NOTES

Add a System User

Command Name
Description
Syntax
Parameters
Example
NOTES
Modify a User's Access Permissions
Command Name
Description
Syntax
Parameters
Example
NOTES
(Revised 2011-07-21)
system show users
Shows a list of users and their permissions on the system
system show users
None
N-TRON/Admin#[1]> system show users
Serial Username
------ --------
1 admin
2 ntron
system add user
To add a user to the system
system add user <username> [access permission]
Username
A string of at least 3 characters and no more then 15 characters
Access permission
"user" or "admin" permission rights
Password
Administrator will be prompted for a password of 3 to 15
characters in length.
N-TRON/Admin#[1]> system add user ntron user
Enter User Password :****
Users with User permissions can not make changes to the switch, but
can view configuration settings and port settings. Users with admin
permissions have the ability to change settings on the switch and can
add more users. There is a limit of 5 users per switch with any
combination of permissions.
system modify useraccess
To change a user‟s permissions
system modify useraccess <username> <access permission>
Username
The user‟s username that is to be modified.
Access permission
"user" or "admin" permission rights
N-TRON/Admin#[1]> system modify useraccess ntron admin
User must have admin permissions to use this command
Access Permissions
------------------
admin
user
page 107 of 152