Whoami; Ping - N-Tron 7014TX User Manual & Installation Manual

"$"
Command Name
Description
Syntax
Parameters
Examples
NOTES

Whoami

Command Name
Description
Syntax
Parameters
Examples
NOTES

Ping

Command Name
Description
Syntax
Parameters
Example
Notes
(Revised 2011-07-21)
$
This command copies the command identified by reference number
<command no> from the history list into the next command line
allowing the user to edit the command for corrections or changes.
$<n>
n
The reference number of the command in the history list
that has to be edited.
N-TRON/Admin#[1]> whoaim
As shown above the command whoaim was entered instead of whoami.
To edit the already entered command do as follows.
N-TRON/Admin#[2]> $1
N-TRON/Admin#[2]> whoaim
Now we can edit the command at the command prompt.
After entering „$1‟ at the prompt, it displays the previously entered
command.
whoami
This command displays the current operating mode of the user.
whoami
None
eg.1
N-TRON/Admin#[5]>whoami
admin with privilege of Administrator
eg.2
N-TRON/User#[5]> whoami
user with privilege of User
ping
To issue the ping request to a specified host.
ping <hostip-address> [count]
hostip-address
IP Address of the host to give the ping request.
count
Count the number of times to give the ping request (range 5-50).
ping 10.1.6.15
ping 10.1.6.15 10
page 101 of 152