Broadcast Packet Count Limit Commands
Get the Broadcast Packet Count Limit for one port
Command Name
Description
Syntax
Parameters
Examples
NOTES
Get the Broadcast Packet Count Limit for all ports
Command Name
Description
Syntax
Parameters
Examples
NOTES
Set the Broadcast Packet Count Limit
Command Name
Description
Syntax
Parameters
Examples
NOTES
(Revised 2011-07-21)
broadcast get percentage
Displays the broadcast packet percentage for a particular port.
broadcast get percentage <port-number>
port-number
The port number must range between 1 and the maximum port number
in the switch.
N-TRON/Admin#[1]> broadcast get percentage 6
The BPCL for port number 6 is : 100
broadcast show percentage
Displays the broadcast packet percentage for all ports.
broadcast show percentage
None
N-TRON/Admin#[1]> broadcast show percentage
Broadcast Percentage Value for Ports
Port #
1 :
100
Port #
2 :
100
Port #
3 :
100
Port #
4 :
100
Port #
5 :
100
Port #
6 :
100
Port #
7 :
100
Port #
8 :
100
Port #
9 :
100
Port # 10 :
100
Port # 11 :
100
Port # 12 :
100
Port # 13 :
100
These are egress filters.
broadcast set percentage
Sets the broadcast packet percentage for a particular port
broadcast set percentage <port-number> <%>
port-number
The port number must range between 1 and the maximum port number
in the switch.
%
The count limit should be in the range 0 to 100 and represents the
percentage.
N-TRON/Admin#[1]> broadcast set percentage 4 100
Default is 3.
Port # 14 :
100
page 145 of 152