Configuration Related Commands; Save Configuration; Load Default Configuration; Configuration Upload - N-Tron 7014TX User Manual & Installation Manual

Configuration Related Commands

Save Configuration

Command Name
Description
Syntax
Parameters
Examples
NOTES

Load Default Configuration

Command Name
Description
Syntax
Parameters
Examples
NOTES

Configuration Upload

Command Name
Description
Syntax
Parameters
Examples
NOTES

Configuration Download

Command Name
Description
Syntax
Parameters
Examples
NOTES
(Revised 2011-07-21)
config save
The configuration will be saved to the flash.
config save
None
N-TRON/Admin#[1]> config save
config erase
This command is useful to erase the configuration data
config erase
None
N-TRON/Admin#[1]> config erase
Load Factory Default Setting. [y/n]y
Factory Default Configuration Successfully loaded
Restart the switch to effect this change
This command will reset all configurable fields back to the default settings
that the switch shipped with. This will change the IP address back to
192.168.1.201 and will change the slot configurations of the 7014 to all
9006TX modules and no gigabit fiber ports.
config send
The configuration on the flash is grouped into a file and sent to the tftp
server.
config send <Server-IpAddress> <File-Name>

Server-IpAddress

IP Address of the TFTP Server, to where the switch configuration data
will be uploaded.

File-Name

Name of the file to be saved as.
N-TRON/Admin#[1]> config send 10.1.6.151 config
The ip address should be the valid tftp server ip address, and the target tftp
server should be running.
config receive
The file name mentioned will be downloaded from the server and the same
configuration is overwritten to the flash.
config receive <Server-IpAddress> <File-Name>
Server-IpAddress
IP Address of the TFTP server, from where the configuration data to be
retrieved.
File-Name
Name of the file to be retrieved.
N-TRON/Admin#[1]> config receive 10.1.6.151 config
The ip address should be the valid tftp server ip address, and the target tftp
server should be running.
page 139 of 152