Show port statistics
Command Name
Description
Syntax
Parameters
Examples
NOTES
Get total number of good frames received
Command Name
Description
Syntax
Parameters
Examples
NOTES
Get port speed
Command Name
Description
Syntax
Parameters
Examples
NOTES
(Revised 2011-07-21)
port show stats
This command is used to get the port statistics of a given port for all
available counters.
port show stats <port-no>
port-no
Port number. (1 ~ 14).
N-TRON/Admin#[1]> port show stats 5
--------------------------------------------
COUNTER TYPE
--------------------------------------------
COUNTER NAME
--------------------------------------------
byteFrames
64 byte Frames
64-127 byte Frames
128-255 byte Frames
256-511 byte Frames
512-1023 byte Frames
1024-1518 byte Frames
1519-1522 byte Frames
... ... ... ...
Check whether port-no is in the valid range. (1 ~ 14)
port get totalgoodframes
Gets the total number of good frames received on the switch.
port get totalgoodframes
None
eg.1
N-TRON/Admin#[1]> port get totalgoodframes
Total no of good frames: [12456]
eg.2
N-TRON/Admin#[1]> port get totalgoodframes
Total no of good frames: [56732]
port get speed
Gets the port speed in megabits.
port get speed <port-no>
port-no
Port number. (1 ~ 14).
N-TRON/Admin#[1]> port get speed 4
port speed of port no [4] is : [10]
N-TRON/Admin#[2]> port get speed 5
port speed of port no [5] is : [100]
Check whether port-no is in the valid range. (1 ~ 14)
:[]
COUNTER VALUE
28072
272
24
43
43
0
0
0
page 113 of 152