Set Igmp Rfilter Mode - N-Tron 7014TX User Manual & Installation Manual

NOTES

Set IGMP rfilter mode

Command Name
Description
Syntax
Parameters
Examples
NOTES
(Revised 2011-07-21)
Port No. IGMP RFilter
----------------------------
5 DISABLE
N-TRON/Admin#[6]igmp/show> igmp show rfilter 5-7
Port No. IGMP RFilter
----------------------------
5 DISABLE
6 DISABLE
7 DISABLE
N-TRON/Admin#[7]igmp/show>
Default: enable
igmp set rfilter
The igmp set rfilter command is used to enable or disable rfilter based on a
port-range.
Usage: igmp set rfilter <enable|disable> <port-list|all>
enable|disable
Enable or Disable the filter on the a specified port.
port-list|all
Enter a specific port number list or specify all ports
N-TRON/Admin#[35]igmp/set> igmp set rfilter enable 5
IGMP RFilter enabled for port 5.
N-TRON/Admin#[36]igmp/set>
Default: enable
page 134 of 152