N-Ring Get Interval; N-Ring Set Interval; N-Ring Get Mode; N-Ring Set Mode - N-Tron 7014TX User Manual & Installation Manual

N-Ring get interval

Command Name
Description
Syntax
Parameters
Example
NOTES

N-Ring set interval

Command Name
Description
Syntax
Parameters
Examples
NOTES

N-Ring get mode

Command Name
Description
Syntax
Parameters
Example
NOTES

N-Ring set mode

Command Name
Description
Syntax
Parameters
Examples
(Revised 2011-07-21)
n-ring get interval
To display the Self-Health Packet interval and missed threshold.
n-ring get interval
None
N-TRON/Admin#[1]> n-ring get interval
Self Health Packet interval is 1
Maximum Missed Packets is 2
Default: interval=1, missed=2
n-ring set interval
Sets the Self-Health Packet interval and missed threshold.
n-ring set interval <interval> [missed]
interval and missed
N-TRON/Admin#[36]n-ring/set> n-ring set interval 1 3
Self Health Packet interval set to 1
Maximum Missed Packets set to 3
The interval is in 10 millisecond increments. The missed threshold sets
how many missed Self-Health Packets constitute a fault.
n-ring get mode
To display the current N-Ring Mode.
n-ring get mode
None
N-TRON/Admin#[1]> n-ring get mode
N-Ring Mode : AutoMember
Port Set : 100
VLAN ID : 1
Tagging : Untagged
Do not use Trunking on a switch that is directly in an active N-Ring.
n-ring set mode
Sets the current N-Ring Mode. Sets ring ports, vlanid and tagging, if manager mode.
n-ring set mode <manager|automember|disable> [-rp <100|GB>] [-vlanid <id>] [-
tagging <tagged|untagged>]
manager|automember|disable
N-Ring mode
A|E
N-Ring ports, 100 for ports FX1 and FX2, while GB for ports GB1 and GB2
id
Unique vlan id (1 - 4094). Default is 3333.
tagged|untagged
Determines whether the N-Ring ports are members of the VLANs
Tagged or Untagged ports. Default is Tagged.
N-Ring Mode set to automember
................
................
.
Device is Going for Reboot....
N-TRON/Admin#[3]> n-ring set mode manager -rp GB
page 136 of 152