Set Rstp Bridge Hello Time; Get Rstp Bridge Hello Time; Set Rstp Bridge Max Age; Get Rstp Bridge Max Age - N-Tron 7014TX User Manual & Installation Manual

Set RSTP Bridge Hello Time

Command Name
Description
Syntax
Parameters
Examples
NOTES

Get RSTP Bridge Hello Time

Command Name
Description
Syntax
Parameters
Examples
NOTES

Set RSTP Bridge Max Age

Command Name
Description
Syntax
Parameters
Examples
NOTES

Get RSTP Bridge Max Age

Command Name
Description
Syntax
Parameters
Examples
NOTES
(Revised 2011-07-21)
rstp set bridgehellotime
To set the HelloTime for a given Vlan-Id.
With STP, Hello Time is the time intervals that the root bridge sends out
new BPDUs to the rest of the network. Other STP capable switches will
forward these BPDUs along. With RSTP every RSTP capable switch will
generate new BPDUs and send them out on every Hello Time Interval.
rstp set bridgehellotime <vlan-id> <hellotime>
vlan-id
Vlan Id for which the priority is to be set.
hellotime
Hello Time to be set.
The valid range of the Hello Time is (1.0-10.0)secs.
N-TRON/Admin#[1]> rstp set bridgehellotime 1 2
N-TRON/Admin#[2]> rstp set bridgehellotime 2 5
Please ensure that the hellotime and vlan id values are valid
rstp get bridgehellotime
To get the Hello Time of a given Vlan Id.
rstp get bridgehellotime<vlan-id>
vlan-id
Vlan Id for which the hellotime is to be viewed.
N-TRON/Admin#[1]> rstp get bridge hellotime 1
N-TRON/Admin#[2]> rstp get bridge hellotime 2
Please supply valid Vlan Index ( being greater than zero)
rstp set bridgemaxage
To set the Max Age for a given Vlan-Id. RSTP Max Age is the time the
switch waits after receiving a BPDU from the root bridge before declaring
that there is no longer a valid path to the root bridge (therefore he attempts
to become the new root bridge on the network). RSTP will only use this as
a backup feature, and to allow compatibility with older STP devices.
rstp set bridgemaxage <vlan-id> <maxage>
vlan-id
Vlan Id for which the priority is to be set.
maxage
The Max Age to be set.
The valid range for maxage is 6.0-40.0 secs. (IEEE 802.1D)
N-TRON/Admin#[1]> rstp set bridgemaxage 1 7
N-TRON/Admin#[2]> rstp set bridgemaxage 2 40
Please ensure that the max age and vlan-id are valid.
rstp get bridgemaxage
Gets the Bridge max age of the given Vlan-Id.
rstp get bridgemaxage <vlan-id >
vlan-id
Vlan ID for which the maxage is to be viewed.
N-TRON/Admin#[1]> rstp get bridgemaxage 1
N-TRON/Admin#[2]> rstp get bridgemaxage 2
Please supply valid vlan Index ( being greater than zero)
page 142 of 152