FRONT PANEL
From Top to Left:
Gigabit Ports
RJ45 Ports
Fiber Ports
NOTE: The RJ45 data port has two LED‟s located on each connector. The left LED indicates LINK status,
and the right LED indicates ACTIVITY.
LED's: The table below describes the operating modes:
LED
Color
GREEN
OFF
GREEN
LNK
OFF
GREEN
ACT
OFF
(Revised 2011-07-21)
1000 Base SFP Copper or Fiber Transceivers (Optional)
Auto Sensing 10/100 Base-TX Connections
100 Base-FX Connections (only on 7014FX2 model)
Green LED lights when Power is supplied to the unit
Description
Power is Applied
Power is OFF
10/100/1000Mb Link between ports
No Link between ports
Data is active between ports
Data is inactive between ports
page 12 of 152