Step 13: Set Up Failure Management; Set Memory Dump (Debug Information) - NEC Express 5800 User Manual

Step 13: Set up Failure Management

Make the following settings beforehand to ensure quick recovery from failure.

Set Memory Dump (Debug Information)

This section explains the setting for collecting memory dump (debug information) in the server.
Notes on memory dump
IMPORTANT:
The maintenance personnel designated by your sales agent are responsible for collecting
memory dump. Customers should make settings of memory dump only.
Sometimes a message indicating a shortage of virtual memory appears at the system startup,
when a failure has occurred after making settings described here and you have restarted the
system to save the memory dump. Continue the startup. If you restart the system, you may not
be able to collect the memory dump accurately.
Take the following steps to set memory dump:
1. From the [Start] menu, select [Control Panel] and then click [System].
The [System Properties] dialog box appears.
2. Click the [Advanced] tab.
3. Click [Settings] in the [Startup and Recovery]
box.
Windows Setup 4-51