NEC Express 5800 User Manual page 83

Registering RDR key
When using the RDR function for the first time, follow the steps below to register the key:
1. Insert "RDR Key FD" that came with the server into the floppy disk drive.
2. From [Start], select [All Programs] – [Accessories] – [Windows Explorer] to start Windows
Explorer, and then double-click "RDRreg.bat" in FD.
3. The message "RDR registration has completed." appe
function becomes available.
4. Press any key on the command prompt to close the window.
Setting dual disk configuration
1. From [Start], select [All Programs] then [RDR] and click [RDR Utility] to start "RDR Utility."
TIPS:
For details of RDR Utility, see "Disk Operations Using the RDR (Rapid Disk Resync)
Function" of "DISK OPERATIONS" in Chapter 3 "Windows Setup and Operations" in
the separate volume of the User's Guide.
The display of R
[Refresh] from [A
described below.
In "RDR Utility", names of PCI
PCI module (Group1) - PCI module 1
PCI module (Group2) - PCI module 2
2. From the tree on the left on the "RDR Utility", right-click a
(Slot1 of PCI module (Grou )) and click [Add RDR Virtual
TIPS:
Depending on the disk condition, RDR setting may take longer time and the "RDR
Utility" may appear to freeze for several minutes, however it is not an error. Wait until
the process ends.
DR Utility is not updated automatically. Theref
ction] or pressing F5 on the menu after perfo
modules correspond as
p1
Windows Setup
ars on the command prompt, and the RDR
ore, update it by clicking
rming operations
below:
di sk where the system
Disk].
4-41
is installed