2.
From "Setup", click "Microsoft HotFix".
The setup of Microsoft HotFix starts automatically. Follow the instructions on the screen and
apply HotFix.
IMPORTANT:
When there is no Microsoft HotFix which needs to be applied to the system, the
following message will appear. There is not any problem of operations.
In the early stage of supporting Windows 2003 Server Service Pack1, no Microsoft
HotFix is registered as those need to be applied.
There is no Microsoft HotFix required to be applied to
this NEC Express5800/ft series.
No applicable Microsoft HotFix is registered to this program.
The process will be terminated.
3.
Restart the system.
If you have "NEC Express5800/ft series ft UPDATE CD-ROM":
1.
Insert the "NEC Express5800/ft series ft UPDATE CD-ROM" into the CD-ROM drive.
2.
Run the following from exploror or using "Run..." of the Start menu.
The setup of Microsoft HotFix starts. Follow the instructions on the screen and apply HotFix.
CD-ROM_drive:\QFE\SETUP.BAT
IMPORTANT:
Procedures after Completion of Installation
5-21