NEC Express 5800 User Manual page 84

4-42 Windows Setup
IMPORTANT:
When RDR is set to a disk which contains system partition or partition which cannot be
unmounted, the following pop-up message appears. If you click [Yes], the O
minutes. Perform the step 3 and on after the OS is restarted.
3. Insert a disk to duplicate into the corresponding slot (in this case, a PCI module for Group2 into
slot 1) .
When t he disk is inserted, RDR is automatically set to it and synchronization starts.
IMP ORTANT:
For t he disk to be inser
the synchronization source disk. If such a disk is not used, the disks ar
succ essfully. (For physical formatting, see "SCS
Con figuration" and perform Low-Level Format fro
the Low-Level Format from the BIOS Setup Utility, select "Advanced", and select
"Monitoring Configuration", then select "Option ROM Scan Monitoring", and change the
status to "Disabled". For how to make the setting, see Chapter 4 "SY
separate vo lume of the User's Guide.)
ted, use a new or physically formatted disk with the same capacity as
I BIOS ~ Fast!UTIL ~" in Chapter 4 "System
m the SCSI Disk Utility. For performing
S is restarted in 2
e not duplicated
STEM BIOS" in the