NEC Express 5800 User Manual page 150

6-24 Troubleshooting
"At least one service or driver failed during system startup.
Use Event Viewer to examine the event log for details."
11. Reb oot the system.
12. After the system has rebooted, log on as
IMPORTANT
LED 2 of each PCI module illuminates green on the front panel of the machine.)
13. Duplicate the LAN again for both onboard and option bo
Refer to "St ep
Adapter)" , "N8104-84 (1000BASE-SX Adapter)" and "N8104-103 (1000BASE-T Ad
separate v olume of User's Guide.
Configure the LAN based on the memo.
14 . Reboot the system.
15. Chec k dis k mirroring.
If the disk mirroring is disabled, enable the mirroring again. For the method to check disk
mirrori g, see "Step 7 Set Dual Disk Configuration" (page 4-36). n
IMPORTANT:
resynchronization is completed.
16. Enab the configuration for boot monitoring function. Enable [Boot Mon le
[Monitoring Configuration] of [Advanced]. See "Step 11: Enable Boot M
page 4- 47 for details.
Check that the dual system is configured properly. (Confirm STATUS
:
5: Set Dual LAN Configuration" on page 4-31 or "N8804-001P1 (10
During disk resynchronization, do not shut down the system until the
a user with Administrative account.
ards.
0BASE-TX
apter)" in the
itoring] selected in
onitoring Function" on