Did you reboot the system after b
→ PROSet II does not start if the syste
breaking dual LAN configuration and uninstalling PROSet II. Also, system performance
may become unstable.
In such case, install PROSet II a
1) Start a command prompt.
2) Run c:\pnpdrvrs\procomp /proset/ s from the command prompt.
3) Reboot the system.
4) Set dual LAN configuration.
reaking dual LAN configuration and uninstalling PROSet II?
m's update was performed without rebooting after
gain by following the steps below:
Troubleshooting
6-31