NEC Express 5800 User Manual page 55

3. Confirm that the BMC Status LEDs (
illuminated POWER switch which is located on the front panel.
PCI modules
IMPORTANT:
Do not turn off the power before the "NEC" logo appears.
When powering on, make sure that the BMC Status LED (
PCI modules are off and then press the power switch.
After a while, the "NEC" logo will appear on the screen.
While the "NEC" logo is displayed on the screen, NEC Express5800/ft series is performing a
power-on self test (POST) to check itself. For details, see the separate volume of User's Guide.
Upon the completion of POST, Windows will start.
If the server finds errors during POST, it will interrupt POST and
CHECK:
display the error message. See the separate volume of User's Guide.
) on both PCI modules are off and press the
BMC Status LED
CPU modules
Windows Setup
POWER switches*
* Only the lit POWER switch can be used.
4-13
) on the both