Step 10: Create Volume - NEC Express 5800 User Manual

4-46 Windows Setup
(After modification)
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows Server 2003, Enterprise" /fastdetect /PAE
S tep 10: Create Volume
For NE C Express5800/ft series, you need to perform
th model. e
W hen you create a new partition or volume, perform mirroring in the folllowing procedures.
TIPS:
For how to create partition or volume, see the Online Help of Windows.
The creation of partition or volume is available after opeation is started
Models which do not support the RDR function
When you create a new volume except boot volu
cr eating volume by seeing "Hard Disk Configurations that can be built on the NEC Express58
se ries" in "Disks Operations Using Disk Management" of "DISK OPERATIONS" in Chap
"W indows Setup and Operation" in the separate volume of the User's Guide.
F or how to mirror volume
S et Dual Disk Configuration".
Models supporting the RDR function
The built-in disks are mirrored by the RDR function on the disk basis. When setting RDR and crea
new partition or volume on a dual disk, that area is mirrored automatically. You do not nee
perform mirroring per partition or volume.
For how to mirror disk by RDR function, see "Setting Dual Disk Configuration b
D isk Resync) function" in "Step 7: Set Dual Disk Configuration".
, see "Setting Dual Disk Configuration by Disk Management" in "Step 7:
mirroring on disk or volume basis depending on
me, perform mirroring on the volume basis after
.
00/ft
ter 3
ting
d to
y the RDR (Rapid