Operation Environment
NEC ESMPRO Agent can be operated in the hardware and software environments shown below.
Hardware
Installation system
•
Memory
•
Empty capacity of hard
•
disk
Software
Preparation before Setup
Be sure to read the following description before system installation or setup.
To operate NEC ESMPRO Agent, you need to make settings of TCP/IP and the SNMP of components
associated with TCP/IP.
TCP/IP Setting
See the Help started from the Start menu for how to set TCP/IP.
SNMP Service Setting
To install the SNMP Service:
1.
Open [Add/Remove Programs] in [Control Panel].
2.
Click [Add/Remove Windows Components].
3.
Select [Management and Monitoring Tools] in the Windows component wizard and click the
[Details...] button.
4.
Check the check box of [Simple Network Management Protocol].
5.
Click the [Next] button.
The file copy operation is started.
6.
After the file copy is finished, click the [Finish] button.
To change the settings of the SNMP Service:
1. Double-click [Administrative Tool] in [Control Panel].
2. Start [Services] in [Administrative Tool].
3. Select [SNMP Service] from the service list and then [Properties] in the [Action] menu.
The "SNMP Properties" dialog box appears.
NEC Express5800/ft series
Memory capacity required to operate OS +
25.0 MB or larger
50.0 MB or larger
Windows Server 2003, Windows 2000
Procedures after Completion of Installation
5-3