NEC Express 5800 User Manual page 134

6-8 Troubleshooting
(b) When the following message appears on the screen press F5 + F6 quickly.
<When starting Recovery Console from Windows Server 2003 CD-ROM>
(a) Insert the Windows Server 2003 CD-ROM into the drive.
(b) When the CD is set, reset the system (press Ctrl + Alt + Delete) or press the power
(c) When the following message appears, press any key to start up from the CD-ROM.
(d) When the following message appears on the screen, press F5 + F6 quickly.
4. When you see the screen for selecting HAL, follow the steps below.
(a) Select "Other" (default) and press Enter.
Please select the operating system to start:
Windows Server 2003, Enterprise
Microsoft Windows Recovery Console
Unless F5 + F6 keys are pressed, Recovery Console
IMPORTANT:
does not start up. If the screen for selecting HAL as described in 4 does not
appear, reboot the system and start again from selection of an operating
system.
switch to power off and on to reboot the NEC Express5800/ft series.
Press any key while the message is displayed. Otherwise
IMPORTANT:
the system will be started up from a hard disk and Recovery Console will
not be started.
Unless F5 + F6 keys are pressed, Recovery Console
IMPORTANT:
does not start up. If the screen for selecting HAL as described in 3 does not
appear, reboot the system and start again from activation of Windows
Server 2003 CD-ROM.