NEC Express 5800 User Manual page 50

4-8 Windows Setup
3. Insert the ROM-DOS startup disk into the floppy disk drive and start the machine.
4. When ROM-DOS starts and prompt "A:\" is displayed, run FDISK command.
5. When the message "Do you wish to enable large disk support? [Y]:" appears, press Y.
6. Press A and delete all partitions. (A: Delete all partitions)
7. When the message "Warning! All data on fixed hard disk 1 will be lost! Are you sure you
want to delete? [N]:" appears, press Y.
8. When the message "Press Esc to return to menu:" appears, press ESC.
9. Press S to save changes. (S: Save changes (and reboot))
10. When the message "Changes saved. Press any key to reboot" is displayed, press any key.
11. When restarting process starts, remove the ROM-DOS startup disk from the floppy disk
drive and power off.
Initialization of hard disks is completed. Start the preparation of NEC Express5800/ft series.