Replacing The Fan Tray Assembly; Removing The Fan Tray Assembly; Figure 5-3 Removing The Fan Tray Assembly - Fujitsu SPARC Enterprise T1000 Service Manual

3. On the rear of the chassis, engage the release lever to secure the card to the chassis
(
FIGURE 5-1
4. Perform the procedures described in
5.2

Replacing the Fan Tray Assembly

5.2.1

Removing the Fan Tray Assembly

1. Perform the procedures described in
2. Disconnect the fan power cable from the motherboard.
3. Push in on the clasps on both sides of the fan assembly (
Fan tray
assembly
FIGURE 5-3
4. Remove the fan assembly from the sheet metal mounting brackets.
5-4 SPARC Enterprise T1000 Server Service Manual • April 2007
).
Removing the Fan Tray Assembly
Chapter 6.
Chapter 4.
FIGURE 5-3
).