Install The Hard Drive Cage - Fujitsu SPARC Enterprise T5220 Service Manual

"Remove the Hard Drive Backplane" on page 152
■

▼ Install the Hard Drive Cage

Before performing any installation steps, review the proper cable routing and
connections. The following topics contain detailed cable routing information.
"Internal Cables for Onboard SAS Controller Cards in SPARC Enterprise T5120
■
Servers" on page 188
"Internal Cables for Onboard SAS Controller Cards in SPARC Enterprise T5220
■
Servers" on page 202
1. Position the hard drive cage in the chassis, over the chassis standoffs.
This is shown in the following figure.
Servicing Boards and Components 149