Install The Hard Drive Backplane - Fujitsu SPARC Enterprise T5220 Service Manual

FIGURE:
3. Slide the backplane down and off the hard drive cage retention hooks.
4. Place the hard drive backplane on an antistatic mat.
Related Information
"Install the Hard Drive Backplane" on page 154
■

▼ Install the Hard Drive Backplane

1. Slide the backplane under the retention hooks on the hard drive cage.
2. Install the No. 1 Phillips screws that secure the backplane to the hard drive
cage.
■
■
154 SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
Removing a Hard Drive Backplane (Illustrating removal from a SPARC
Enterprise T5220 server)
Two screws secure the backplane in the SPARC Enterprise T5120 server. See the
first figure below.
Four screws secure the backplane in the SPARC Enterprise T5220 server. See the
second figure below.