FIGURE:
2. Slide the pull tab back into the system.
3. Install the hard drive you removed during the DVD/USB module removal
procedure.
4. Plug in the power cords.
See
5. Power on the system.
See
On the Server Using the Front Panel Power Button" on page
Related Information
"Remove the DVD/USB Module" on page 139
■
"Servicing the Hard Drive Backplane" on page 152
■
142
SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
Installing the DVD/USB Module (Illustrates installing in a SPARC Enterprise
T5120 server)
"Connect Power Cords to the Server" on page
"Power On the Server Using the poweron Command" on page 179
178.
or
180.
"Power