Install The Front Control Panel Light Pipe Assemblies - Fujitsu SPARC Enterprise T5220 Service Manual

FIGURE:
3. Slide the light pipe assembly out of the control panel.
Related Information
"Install the Front Control Panel Light Pipe Assemblies" on page 158
■
"Remove the Hard Drive Cage" on page 146
■
▼ Install the Front Control Panel Light Pipe
Assemblies
1. Insert the light pipe assembly into the control panel.
2. Align the control panel light pipe assembly with the mounting holes on the
hard drive cage.
■
■
158 SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
Removing the Front Control Panel Light Pipe Assembly From a SPARC
Enterprise T5220 Server
Two screws secure the assembly to the hard drive cage in the SPARC Enterprise
T5120 server. See the first figure below.
Three screws secure the assembly to the hard drive cage in the SPARC
Enterprise T5220 server. See the second figure below.