Fujitsu SPARC Enterprise T5220 Service Manual page 112

FIGURE:
6. Press the Fault Locator button on the motherboard to identify the FB-DIMMs
that need to be replaced.
Tip – Make a note of the faulty FB-DIMM location.
Note – For memory configuration information, see
Guidelines" on page
7. Push down on the ejector tabs on each side of the FB-DIMM until the
FB-DIMM is released.See
See panel 3 in the preceding figure.
Caution – FB-DIMMs and heat sinks on the motherboard may be hot.
8. Grasp the top corners of the faulty FB-DIMM and lift it out of its slot.
86 SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
Removing FB-DIMMs
95.
FIGURE: Removing FB-DIMMs on page
"FB-DIMM Configuration
86.