Installing a PCIe Card (SPARC Enterprise T5220)
FIGURE:
6. Insert the PCIe/XAUI card into the correct slot on the riser board.
7. Replace the PCIe/XAUI riser.
See
"Install a PCIe/XAUI Riser" on page
8. Install the top cover.
See
"Install the Top Cover" on page
9. Slide the server into the rack.
See
"Return the Server to the Normal Rack Position" on page
10. Connect any data cables required to the PCIe/XAUI card.
Route data cables through the cable management arm.
104.
175.
Servicing Motherboard Components
177.
109